| 名稱 | 參數 |
| A. Maximum dig radius | 6255mm |
| B. Dig radius at groundline | 6105mm |
| C. Maximum dig depth | 3720mm |
| D. Dump height | 3950mm |
| E. Overall reach height | 5790mm |
| F. Bucket rotation | 170° |
| G. Vertical straight wall dig depth | 3215mm |
| H. Lift above groud | 385mm |
| J. Drop below groud | 450mm |
| K. 工作裝置最小回轉半徑 | 2610mm |
| Arm digging force | 37KN |
| Bucket digging force | 27KN |
| Width | 668mm |
| Capacity | 0.18 m3 |
| Weight | 150kg |
| Model | YC4F60G / YANMER 4TNV98 |
| Cylinders | 4 |
| Bore/Stroke | 98×100mm |
| Displacement | 3.319L |
| Fuel injection | Direct |
| Fuel injection pump | Mechanical |
| Fuel | Diesel |
| Fuel filter | Full flow |
| Cooling | Water-cooling |
| Horswpower(net) | 45.3kw @2200rpm |
| Maximum torque(net) | 227.2～247.3N·m @1400rpm |
| Swing | 80° left / 50° right |
| Length | 3100mm |
| Boom weight | 230kg |
| Length | 1500mm |
| Arm weight | 80kg |
| Top,each track | 1 |
| Bottom,each track | 5 |
| Pumps(3) | 2×Variable displacement piston pump+gear pump |
| Capacity- Maximum | 2×55L/min+36.5L/min |
| Standard | 21MPa+18MPa |
| Pumps(1) | Gear pump |
| Maximum capacity | 9.9L/min |
| Relief pressure | 3.5MPa |
| Motor(1) | Fixed displacement axial piston design |
| Speed | 0-11rpm |
| Tail swing radius | 1700mm |
| Motor(2) | Two-speed axial piston design |
| Final drive | Planetary gear reduction |
| Travel speeds- | Forward/Reverse |
| Low | 2.2km/h |
| High | 4km/h |
| Bore diameter | 110mm |
| Rod diameter | 55mm |
| Stroke | 720mm |
| Bore diameter | 85mm |
| Rod diameter | 55mm |
| Stroke | 600mm |
| Bore diameter | 80mm |
| Rod diameter | 45mm |
| Stroke | 840mm |
| Voltage | 12 volts |
| Alternator | 40 amp |
| Batteries(1) 12V | Heavy-duty |
| Refill capacity | 92L |
| Total system | 140L |
| w/filter change | 10L |
| Fuel | 75L |
| Radiator | 10L |
| With 75kg operator | 6000kg |
| Ground pressure | 30KPa |
斗山DH225LC..
斗山DX150LC
斗山DX345LC
斗山DX260LC
斗山DH80GOL..
